Measurement of the surface excitation parameter of Kapton,polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE)

Reflection electron energy loss spectra (REELS) were measured for five insulating organic compounds: Kapton, polyethylene (PE), poly(methyl methacrylate) (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE), as well as for Ni and Si, in the energy range between 200 and 1600 eV. The average number of surface excitations for a single surface crossing were determined from the experimental data and were found to be considerably smaller than for earlier studied materials, which mainly consisted of elemental metals [Surf. Sci. 486(2001)L461]. The surface excitation parameter, a material parameter used to quantify the relative intensity of surface losses in (photo)electron spectroscopy, was extracted from the data and compared with values found in the literature. The results indicate that surface excitations only have a minor influence on quantification of XPS spectra of polymers. On the other hand, a correction for surface excitations turns out to be essential for measurements of the electron inelastic mean free path of polymers when a metal is used as reference material.     

Facile preparation of superhydrophobic nanorod surfaces through ion-beam irradiation

Obtaining superhydrophobic surfaces for their application in electronics and flexible wearable devices remains a significant challenge. Most previously reported methods for obtaining superhydrophobic surfaces involve complex and expensive preparation techniques and thus cannot be used for practical applications. Ion-beam irradiation is a simple and promising method for fabricating superhydrophobic nanostructures on large areas at a low cost. Ion-beam irradiation using argon and oxygen gases was used to prepare silica nanorod structures on glass substrates. This study is not just a modification of the surface of nanoparticles, but a change in nanoparticle shape. The nanorods were subsequently treated with perfluorooctyltriethoxysilane to obtain superhydrophobicity. The surface of the silica nanorods exhibited a static water contact angle of 153°, indicating superhydrophobicity. The combination of rough structures of silica nanorods and low surface energy resulted in superhydrophobicity. The surface properties were evaluated in detail using Fourier-transform infrared spectroscopy, field-emission scanning electron microscopy, and X-ray photoelectron spectroscopy. The proposed method is facile, inexpensive, and can be used for the large-scale production of nanorod structures for potential industrial applications.     

Three-ligand Co-assembled 2D Au(I)-Thiolate Nanosheets

Two-dimensional (2D) Au(I)-thiolate assemblies are a special type of material that can balance high structural stability and rich surface functionality, which shows promising prospects in both fundamental research and applications. Co-assembly of multiple ligands is a facile way to further enrich the surface properties and functions, and expand their application potentials. In this work, taking 3-mercaptopropionic acid (MPA), cysteine (Cys) and 1-thioglycerol (TGO) as example ligands, we studied in detail the possibility to co-assemble them into one nanosheet. Although the three ligands have significantly different controllability and pathways when self-assembling individually with Au(I), they can still be effectively co-assembled by reacting with HAuCl₄ together to obtain three-ligand nanosheets with good colloidal stability. The key points for successful co-assembly are also revealed by comparing single- and three-ligand self-assembly processes, laying a solid foundation for co-assembly of even more ligands. The easy but powerful strategy for 2D materials with closely-packed and multiple tunable surface functional groups addresses the surface engineering problem for 2D materials and paves the way for their wider applications in sensing and biomaterials.     

Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。     

A Review on Natural Fiber Bio-Composites,Surface Modifications and Applications

Increased environmental concerns and global warming have diverted focus from eco-friendly bio-composites. Naturals fibers are abundant and have low harvesting costs with adequate mechanical properties. Hazards of synthetic fibers, recycling issues, and toxic byproducts are the main driving factors in the research and development of bio-composites. Bio-composites are degradable, renewable, non-abrasive, and non-toxic, with comparable properties to those of synthetic fiber composites and used in many applications in various fields. A detailed analysis is carried out in this review paper to discuss developments in bio-composites. The review covers structure, morphology, and modifications of fiber, mechanical properties, degradable matrix materials, applications, and limitations of bio-composites. Some of the key sectors employing bio-composites are the construction, automobile, and packaging industries. Furthermore, bio-composites are used in the field of medicine and cosmetics.     

PVT法氮化铝晶体铝面、氮面生长对比分析

在氮气环境下用PVT方法生长氮化铝过程中,氮面和铝面由于表面化学性质不同,生长的主要化学反应速度存在差异。原子在生长表面的迁移能力不同造成单晶表面生长方式差异较大。在基本相同条件下(生长温度、生长温差、生长气压、类似的籽晶、同一台生长设备)进行了铝、氮面氮化铝单晶晶体生长。为了更明显地表现铝氮面的差异,将同一片籽晶分为两半,翻转其中一半让铝氮面同时生长。铝面生长较好的区域形成了明显的晶畴,而氮面生长时生长较好的部分出现了明显的生长台阶,并出现了晶畴边界被生长台阶湮灭的生长现象,进一步通过AFM观测到铝面生长台阶平整但被缺陷所阻隔,晶畴发育明显为各晶畴独立生长。氮面生长台阶没有铝面规则但连续性较强,在原来晶畴边界位置也出现了连续的生长台阶(或台阶簇)。所以籽晶质量不高时氮面生长更容易提高晶体质量,后续的XRD测量结果也证明了氮面生长后的晶体质量明显高于铝面生长的晶体质量。     

不同退火条件对PEALD制备的Ga2O3薄膜特性的影响

利用等离子增强原子层沉积技术(PEALD)在c面蓝宝石衬底上制备了氧化镓(Ga₂O₃)薄膜,研究了退火气氛(v(N₂)∶v(O₂)=1∶1(体积比)、空气和N₂)及退火时间对Ga₂O₃薄膜晶体结构、表面形貌和光学性质的影响。研究结果表明,退火前的氧化镓处于亚稳态,不同退火气氛下退火后晶体结构发生明显改变,而且退火气氛中N₂比例增加有利于Ga₂O₃重结晶。在N₂气氛下退火达到30 min,薄膜结构已由亚稳态转变成择优取向的β-Ga₂O₃。而且表面形貌分析表明,退火30 min后表面形貌开始趋于稳定,表面晶粒密度不再增加。另外实验样品在 400~800 nm的平均透射率几乎是100%,且光吸收边陡峭。采用N₂气氛退火,对于富氧环境下沉积的Ga₂O₃更利于薄膜表面原子迁移,以及择优取向Ga₂O₃重结晶。     

SAPO-34提升铁钒基催化剂抗碱性能研究

采用浸渍法制备Fe-VO_x/SAPO-34和Fe-VO_x/TiO₂脱硝催化剂,探究SAPO-34分子筛与TiO₂两种载体负载铁钒基氧化物催化活性及抗碱性能的差异。借助X射线衍射(XRD)、X射线光电子能谱(XPS)、氨气程序升温脱附(NH₃-TPD)、氢气程序升温还原(H₂-TPR)、原位红外漫反射(in-situ DRIFTs)等表征手段对催化剂的骨架结构、表面物化性质、氧化还原能力以及对反应气体的吸脱附情况进行分析。结果表明:SAPO-34分子筛内部特定的孔道结构和稳定的骨架,有利于活性组分在载体上均匀分散,降低碱金属对表面活性中心的物理覆盖作用;同时其表面丰富的酸位点能够作为碱金属捕获位,保护催化剂表面的活性中心,保证催化剂的吸附-反应过程能够正常进行,从而使Fe-VO_x/SAPO-34表现出良好的抗碱金属能力。